Groundedelectricalsupplyrequired.
Donotrundrainlines,waterlinesorelectricalwiringwherethey
caninterferewithorcontactdishwashermotororlegs.
Thelocationwherethedishwasherwillbeinstalledmustprovide
clearancebetweenmotorandflooring.Motorshouldnottouch
thefloor.
Donotinstalldishwasherovercarpetedflooring.
Shelterdishwasherandwaterlinesleadingtodishwasheragainst
freezing.Damagefromfreezingisnotcoveredbythewarranty.
Amoisturebarrieraccessory(PartNumber4396277)isavailable
fromyourdealerforinstallingunderneaththecountertop.
Call1-800-422-1230toorder.InCanada,call1-800-807-6777.
Locat on Requirements
Check location where dishwasher will be installed. The location
must provide;
• easy access to water, electricity and drain.
• convenient access for loading and unloading dishes.
Corner locations require a 2" (5.1 cm) minimum clearance
between the side of the dishwasher door and the wall or
cabinet.
• square opening for proper operation and appearance.
• cabinet front perpendicular to floor.
• level floor. If floor at front of opening is not level with floor
at rear of opening, shims may be needed to level
dishwasher.
Helpful Tip: Be sure to accurately measure dimensions and
ensure dishwasher is level if the floor in the dishwasher opening is
uneven (example: Flooring extends only partway into opening).
NOTE: To avoid shifting during dishwasher operation, shims must
be securely attached to the floor.
If dishwasher will be left unused for a period of time or in a
location where it may be subject to freezing, have it winterized by
authorized service personnel.
Make sure pipes, wires and drain hose are within the shaded area
shown in the "Product and Cabinet Opening Dimensions" section.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
