Klipsch R-25 User Manual

Service Manual – Consumer
4
Tweeter Removal for R-25C
Tools needed:
Small flat blade screwdriver
3mm hex (Allen) key
First, with a small flat blade screwdriver, gently pry the up the trim ring around the tweeter,
highlighted in red
Be sure to pry the trim ring up in between the tweeter horn and the trim ring as shown below.
Prying between the trim ring and the cabinet may cause damage to the cabinet.
Pry slowly around the edge of the tweeter horn to release all the clips.

Klipsch R-25 Specifications

General

Brand	Klipsch
Model	R-25
Category	Speakers
Language	English