17
kobalttools.com
OPERATING INSTRUCTIONS
10. Bevel Cutting
To make the best possible cut:
a. Align the cutting line with the blade-guide notch (S)
on the base when making 45° bevel cuts.
b. Make a trial cut in scrap material along a guideline to
determine the amount to offset the guideline on the
cutting material.
between 0° and 50°.
WARNING: Attempting a bevel cut without having
the bevel-locking knob securely locked in place can result
e. Rest the front edge of the base on the workpiece
without touching the blade to the workpiece.
f. Start the saw and allow the blade to reach full speed.
g. Guide the saw into the workpiece, and make the cut.
h. Release the trigger switch and allow the blade to
come to a complete stop.
i. Lift the saw from the workpiece.
S
10
To Next Page
Loading...
Need help?
General
