8
kobalttools.com
OPERATING INSTRUCTIONS
1. To Attach Battery Pack
b. Align the raised rib on the battery pack (not included)
NOTICE: Make sure that the latch on the battery pack
snaps into place and the battery pack is secured to the
tool before beginning operation.
CAUTION: When placing the battery pack on the
tool, be sure that the raised rib on battery pack aligns
place properly. Improper assembly of the battery pack
can cause damage to internal components.
To Detach Battery Pack (Fig. 1)
b. Depress the battery-release button located on the
front of the battery pack to release the battery pack.
2. Blade Selection
important to select the correct blade for the particular
application and type of material to be cut.
more teeth are better for cutting metal or plastic.
We recommend 14 TPI blades for plastics and soft
metals and 18 TPI blades for hard metals.
Installing a Saw Blade (Fig. 2)
b. Pivot the blade-clamp lever (E) to open the blade
clamp.
possible, and release the blade-clamp lever to lock the
blade in position.
d. Check that the blade is securely attached.
AT TACH
DETACH
AT TACH
1
2
E
BLADE
CLAMP
To Next Page
Loading...
Need help?
General
