12
OPERATING INSTRUCTIONS
4. Starting/Stopping the Power Head
WARNING:
• Never operate the power head without an
attachment. Do not attempt to start the power
head without an attachment.
To start the power head
a. To turn the power head ON, push the lock-off
button (E) to left or right and then depress the
variable-speed trigger switch (F).
b. The variable-speed trigger switch delivers
higher speed with increased trigger pressure
and lower speed with decreased trigger
pressure.
To stop the power head
Release the variable-speed trigger switch (F) to stop the power head.
WARNING
• Always remove the battery pack from the power head during work breaks and after nishing
work.
5. Changing Speed Mode
Slide the speed-selector switch (D) to position “1”
for low speed or position “2” for high speed.
NOTE: When in high speed mode, runtime will be
decreased as compared to when the tool is in low
speed mode.
4
E
F
5
D
To Next Page
Loading...
Need help?
General
