14
CARE AND MAINTENANCE
All maintenance should only be carried out by a qualied service technician.
Cleaning
Before cleaning or performing any maintenance, remove the battery pack. For safe and
proper operation, always keep the tool and its ventilation slots clean.
When work has been completed, clean the tool to allow smooth functioning of the tool over
time.
Always use only a soft, dry cloth to clean your tool; never use detergent or alcohol.
Always wear safety goggles when cleaning tools with compressed air.
TROUBLESHOOTING
WARNING: Place the trigger switch (F) in the OFF position and remove the battery before
performing troubleshooting procedures.
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
Tool does not work.
Low battery capacity. Charge the battery pack.
The battery pack is not
inserted properly.
Install the battery pack into the tool
correctly.
Motor overheating
Ventilation slots are
obstructed
Clean and clear the ventilation
slots. Do not cover the ventilation
slots with your hand during
operation
WARRANTY
For 5 years from the date of purchase, the circular saw is warranted for the original purchaser
to be free from defects in material and workmanship. This guarantee does not cover damage
due to abuse, normal wear, improper maintenance, neglect, unauthorized repair/alteration, or
expendable parts and accessories expected to become unusable after a reasonable period of
use.
If you think your product meets the above guarantee criteria, please return it to the place of
purchase with valid proof of purchase and the defective product will be repaired or replaced at
no charge. This guarantee gives you specic legal rights, and you may also have other rights
that vary from state to state.
Lowe’s Home Centers LLC.
Mooresville, NC 28117
Printed in China
To Next Page
Loading...
Need help?
General
