12
CARE AND MAINTENANCE
To promote longer life of the power cleaner:
• Do not run over the hose with vehicles or drag over sharp surfaces, as this could damage the
hose and cause leaks.
• Run clean, fresh water through the kit, then turn off pressure washer and water supply.
• Depressurize by squeezing the gun trigger until all the water has been drained out of the Unit.
• Unit can now be disconnected safely for storage in a cool dark area, or to remove debris from
individual parts.
Keep hose away from hot surfaces (like a mufer). If hose develops a leak, do not try to repair it.
REPLACE THE ENTIRE HOSE. Hose is for cold water pressure washers only. DO NOT use with hot
water or steam service.
WARNING
To Next Page
Loading...
Need help?
General
