16
CARE AND MAINTENANCE
Always depressurize the sprayer, remove all chemical solution, and clean the sprayer before making
repairs. Replacement parts may be purchased at the store where you bought the sprayer. For a list of
replacement parts refer to page 18.
CLEANING AND MAINTAINING THE MACHINE
After each use, clean the tank thoroughly. If spray solution remains, properly dispose of it and drain
the tank completely. Follow recommendations from the chemical manufacturer for proper disposal
of the solution. Pumping causes air to be taken in, and the remaining liquid needs to be discharged.
Pump until all liquid and air are completely discharged through the nozzle. Rell the tank with a few
quarts of soapy water (a mild dish detergent is recommended) and discharge as previously instructed.
If necessary, repeat this procedure several times to ensure that the sprayer is clean. Sporadic spray
distribution is caused by a clogged nozzle. If necessary, remove and clean nozzle.
MAINTENANCE AND STORAGE
After use, the sprayer should be properly cleaned and stored away from direct sunlight to prevent UV
damage. Before storing for the winter, be sure that all liquid is completely drained from the tank, lines
and air chamber. (Refer to the CLEANING AND MAINTAINING THE SPRAYER instructions above).
Regularly inspect hose, pump tank for water, damage or leaks.
WARNING
To Next Page
Loading...
Need help?
General
