19
2. Clean line cutter blades by using a wire brush and
spraying with an appropriate degreaser.
CARE AND MAINTENANCE
3. Inspect spool and line to ensure that there is an adequate
amount of line and that no damage is present to the
spool.
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
Motor fails to start
when switch trigger
is depressed.
1. Battery is not secure.
2. Battery is not charged.
1. To secure the battery, make sure the latches
on the battery compartment snap into place.
2. Charge the battery according to the
instructions included with your model.
Motor runs, but
string head does
not move.
1. Trimmer damaged. 1. Do not use the string trimmer. Call
1-888-3KOBALT (1-888-356-2258) for
technical service.
Trimmer smokes
during operation.
1. Trimmer damaged. 1. Do not use the string trimmer.
Call 1-888-3KOBALT (1-888-356-2258) for
technical service.
If you still have questions or an unresolved issue after going through this troubleshooting guide, or
just want to speak to a Kobalt product expert, please call our Kobalt customer service department at
1-888-3KOBALT (1-888-356-2258), 8 a.m. - 8 p.m., EST, Monday - Friday.
Storage tips:
• Do not store the string trimmer in sunlight, in an
excessively warm place, or near a furnace. The
battery life will be shortened.
To Next Page
Loading...
Need help?
General