5
SYMBOLS DESIGNATION EXPLANATION
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watts Power
min Minutes Time
Alternating Current Type of current
Direct Current Type or a characteristic of current
n
o
No Load Speed Rotational speed, at no load
/min Per Minute
Revolutions, strokes, surface speed, orbits, etc.,
per minute.
Wet Conditions Alert Do not expose to rain or use in damp locations.
Read the Operator’s Manual
To reduce the risk of injury, user must read and
understand operator’s manual before using this
product.
Eye Protection
Wear eye protection with side shields that are
marked to comply with ANSI Z87.1 when
operating this equipment.
.ytefas ruoy evlovni taht snoituacerPtrelA ytefaS
No Blade
Do not install or use any type of blade on a
product displaying this symbol.
Ricochet
Thrown objects can ricochet and result in
personal injury or property damage.
Keep Bystanders Away Keep all bystanders at least 50 ft. away.
SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the product better and safer.
To Next Page
Loading...
Need help?
General