Kobalt SGY-APS41 User Manual

12
kobalttools.com
UNDERSTANDING AIRLESS PAINT SPRAYER COMPONENTS
Coating Selection
Tip Hole Size
(expressed as diameter, based
Stains Enamels Oil-based
primers
and paints
Interior
latex
paints
Exterior
latex
paints
Acrylics
0.011 in. (0.28 mm) X
0.013 in. (0.33 mm) XXX X
0.015 in. (0.38 mm) X X X X
0.017 in. (0.43 mm) X XXX
0.019 in. (0.48 mm) X X
• ezispiT 513 – Designed to be used with lighter materials; mostly stains, lacquers and enamels, along
with some lighter oil-based paints.
• ezispiT 517 – Designed to be used with paint and acrylics (both oil based and latex).
Note: ALWAYS
of the paint sprayer. Heavier materials will require a larger tip size. Lighter materials such as stains
and enamels may require a smaller tip size. Most spray material labels indicate the suggested or
recommended tip size for proper spraying. If you are uncertain which tip size is correct, consult your
local retailer for additional assistance.
ASSEMBLY INSTRUCTIONS
1.
connections are properly secure. Fully tighten
using wrench (O).
1
G
O
K
SETUP

Kobalt SGY-APS41 Specifications

General

Brand	Kobalt
Model	SGY-APS41
Category	Paint Sprayer
Language	English