Kobalt SM1850LW User Manual

32
Bevel/Miter Settings
KEY
BEVEL
SETTING
MITER
SETTING
TYPE OF CUT
Inside corner - Left side
IL 33.9° 31.6° Right
1. Position top of moulding against fence.
2. Miter table set at RIGHT 31.6°.
3. LEFT side is finished piece.
Inside corner - Right side
IR 33.9° 31.6° Left
1. Position bottom of moulding against fence.
2. Miter table set at LEFT 31.6°.
3. LEFT side is finished piece.
Outside corner - Left side
OL 33.9° 31.6° Left
1. Position bottom of moulding against fence.
2. Miter table set at LEFT 31.6°.
3. RIGHT side is finished piece.
Outside corner - Right side
OR 33.9° 31.6° Right
1. Position top of moulding against fence.
2. Miter table set at RIGHT 31.6°.
3. RIGHT side is finished piece.

Kobalt SM1850LW Specifications

General

Brand	Kobalt
Model	SM1850LW
Category	Saw
Language	English