Replacements and Installations
SM5440-1 – 18NOV97 11
[6] Lift and remove the LOWER LIGHT BAFFLE ASSEMBLY.
[7] Lift the GRILLE ASSEMBLY up.
[8] Remove the 2 long
Torx
from the BLOWER COVER ASSEMBLY.
[9] Lift the BLOWER COVER ASSEMBLY up.
[10] Lift and move the PREHEAT DUCT up.
[11] To remove the LAMP MODULE RECEPTACLE from the PREHEAT DUCT, compress the 2 TABS on the LAMP
MODULE RECEPTACLE.
Installing the LAMP MODULE RECEPTACLE
Warning
Dangerous Voltage
[1] Disconnect the main power.
[2] Do the replacement procedure for the LAMP MODULE RECEPTACLE in reverse order.
A100_0032HA
A100_0032HCA
LOWER LIGHT BAFFLE
SCREW (2)
PRE-HEAT DUCT
SCREW (2)
BLOWER COVER
ASSEMBLY
LAMP MODULE
RECEPTACLE
SCREW (not shown)
To Next Page
Loading...
Need help?
General