Kodak ESP 5 User Manual

Chapter 7
Kodak ESP 5 Printer User Guide 35
1 Make sure that there are 5 - 10 sheets of plain paper loaded in the paper tray.
2 Press
Menu to display the main menu.
3 Press
 until Maintenance is selected.
4 As needed, press
 until the desired option is selected.
5 Press
OK.
6 Follow the prompts in the display screen to initiate or cancel the task.
These available maintenance options are shown in the table below:
Maintenance Options
Tip: A printhead alignment and a check of the inkjet nozzle can also be
initiated from the Home Center software.
Windows: Open the Home Center Help panel byclicking Help on the
Home Center window, as needed. Click
Maintenance, and then click
Nozzle Check or Printhead Alignment.
Macintosh: Open the Home Center window and click Maintenance, and
then click
Nozzle Correction or Printhead Alignment.
Menu Options Select
Check Ink Levels OK
Nozzle Check
OK
Printhead Alignment
OK
Clean Printhead
OK
Print Demo Sheet
OK
Print Test Page
OK
Format Memory Card
OK
Warning: Formatting will erase all the data on a memory card.

Kodak ESP 5 Specifications

General

Brand	Kodak
Model	ESP 5
Category	All in One Printer
Language	English