Kodak FLIK HD10 User Manual

10 | EN
INSTALL BATTERIES INTO THE REMOTE CONTROL
SET UP THE PROJECTOR
1. Press down and slide o the battery cover.
2. Insert the two (2) AAA batteries into the battery compartment.
3. Place the battery cover back on the remote control.
1. Place the projector in front of a suitable projection screen or wall.
2. Connect the AC adapter to the power cord.
3. Then, connect the power jack of the AC adapter to the projector.
4. Connect the wall plug of the power cord to a wall outlet. The LED indicator on the
back of the projector will light up red.

Kodak FLIK HD10 Specifications

General

Brand	Kodak
Model	FLIK HD10
Category	Projector
Language	English