7
Cleanup Instructions
Working with Detergent
Detergent Overview
To enhance the efficiency of the pressure washer,
sometimes it is necessary to use detergents to
help loosen tough dirt and grime.
CAUTION: This machine has been designed for
use with pressure washer detergents only. The
use of other detergents or chemicals may affect
the operation of the machine and will void the
warranty.
NOTE: To apply detergent, the black-coloured
detergent nozzle must be used to activate the
low-pressure detergent injection system.
WARNING!
• Never use bleach, chlorine products and
other corrosive chemicals
• Never use liquids containing solvents
(i.e., paint thinners, gasoline, oils)
• Never use tri-sodium phosphate products
• Never use ammonia products
• Never use acid-based products
These products can cause physical injuries
to the operator and irreversible damage to
the machine and/or damage the surface
being cleaned.
Detergent Application
Step 1 Insert detergent suction tube into a clean
container (not supplied) with one gallon
(4 L) of fresh water.
Step 2 Pull back the collar on the spray lance
to insert detergent nozzle (see page 6).
Step 3 With the engine running, depress the
gun trigger to apply detergent to the work
area; DO NOT allow detergent to dry
on surface.
Step 4 Release the gun trigger and attach one
of the high-pressure nozzles to rinse
(see page 6).
Step 1 Place suction hose into a container
of pressure washer detergent.
Step 2 Pull back the collar on the spray lance
to insert detergent nozzle (see page 6).
Step 3 With the engine running, press and hold
the gun trigger for one minute or until the
container of fresh water is empty.
Step 4 Release the gun trigger and attach one of
the high-pressure nozzles (see page 6).
IMPORTANT: When you have finished using detergent, always follow the Cleanup Instructions.
Failure to clean properly will cause the injection system to become clogged and inoperable.
To Next Page
Loading...
Need help?
General
