Kohler Aquifer K-22155-NA User Manual

2. Install the Faucet
IMPORTANT! For existing installations: Turn off the cold water supply to the filtration system, and turn
on the faucet to relieve water pressure.
NOTE: For existing installations: The hose connected to the cold water supply will need to be
uninstalled.
Remove the O-ring from the base of the faucet body and discard.
Install the air gap assembly to the underside of the faucet.
Install the faucet to the sink.
From underneath the sink, slide the bracket over the stud.
Tighten the nut against the bracket to secure the faucet into place.
Hose
Stud
Nut
Air Gap
Assembly
Bracket
Hose
Stud
Kohler Co. 5 1395432-2-B

Kohler Aquifer K-22155-NA Specifications

General

Brand	Kohler
Model	Aquifer K-22155-NA
Category	Water Filtration Systems
Language	English