Kohler Command PRO CH940 Service Manual

Specications
16 62 690 01 Rev. JKohlerEngines.com
TORQUE SPECIFICATIONS
3,5
CH940 CH960 CH980 CH1000
Oil Filter Adapter/Housing
Adapter/Housing Mounting Screw 23.7 N·m (210 in. lb.)
Oil Filter Nipple 17.8 N·m (158 in. lb.)
Oil Pickup Screen
Mounting Screw 9.3 N·m (82 in. lb.) into new holes
7.7 N·m (68 in. lb.) into used holes
Oil Pickup Tube
Mounting Screw 11.3 N·m (100 in. lb.) into new holes
7.7 N·m (68 in. lb.) into used holes
Oil Pump
Mounting Screw 9.9 N·m (88 in. lb.)
Oil Sentry
TM
Pressure Switch 10.7 N·m (95 in. lb.)
Reservoir (oil)
Mounting Screw 25.6 N·m (227 in. lb.)
Solenoid (starter)
Mounting Hardware 4.0-6.0 N·m (35-53 in. lb.)
Nut, Positive (+) Brush Lead 8.0-11.0 N·m (71-97 in. lb.)
Starter Assembly
Thru Bolt 5.6-9.0 N·m (49-79 in. lb.)
Mounting Screw 16.0 N·m (142 in. lb.)
Brush Holder Mounting Screw 2.5-3.3 N·m (22-29 in. lb.)
Stator
Mounting Screw 9.3 N·m (82 in. lb.)
Throttle/Choke Control Bracket
Fastener 10.2 N·m (90 in. lb.)
Valve Cover
Valve Cover Fastener 13.6 N·m (120 in. lb.)
CLEARANCE SPECIFICATIONS
3
CH940 CH960 CH980 CH1000
Camshaft
End Play 0.3/1.3 mm (0.011/0.051 in.)
Running Clearance 0.025/0.063 mm (0.0010/0.0025 in.)
Bore I.D.
New
Max. Wear Limit
20.000/20.025 mm (0.7874/0.7884 in.)
20.038 mm (0.7889 in.)
Bearing Surface O.D.
New
Max. Wear Limit
19.962/19.975 mm (0.7859/0.7864 in.)
19.959 mm (0.7858 in.)
3
Values are in Metric units. Values in parentheses are English equivalents.
5
Lubricate threads with engine oil prior to assembly.

Kohler Command PRO CH940 Specifications

General

Brand	Kohler
Model	Command PRO CH940
Category	Engine
Language	English