EasyManuals Logo
Home>Kohler>Engine>Command Pro ECV880

Kohler Command Pro ECV880 User Manual

Kohler Command Pro ECV880
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #44 background imageLoading...
Page #44 background image
EFI SYSTEM
44
19 690 01 Rev. --KohlerEngines.com
Code 0171
Component: Fuel System
Fault: Maximum adaptation limit exceeded
Condition: Fuel inlet screen/ lter plugged, low
pressure at high pressure fuel line, TPS
malfunction, shorted connection, faulty
sensor, low fuel or wrong fuel type.
Conclusion: Oxygen Sensor Related
Corrosion or poor connection.
Sensor contaminated or damaged.
Air leak into exhaust.
Poor ground path.
Pin circuit wiring or connectors.
ECU Black pin 10 or Black pin 17.
TPS Sensor Related
Throttle plate position incorrect during
Learn procedure.
TPS problem or malfunction.
Engine Wiring Harness Related
Difference in voltage between sensed
voltage and actual sensor voltage.
Problem in wiring harness.
ECU-to-harness connection problem.
Systems Related
Ignition (spark plug, plug wire, ignition
coil).
Fuel (fuel type/quality, injector, fuel
pressure too low, fuel pump module or
lift pump).
Combustion air (air cleaner dirty/
restricted, intake leak, throttle bores).
Base engine problem (rings, valves).
Exhaust system leak (muf er, ange,
oxygen sensor mounting boss, etc.).
Fuel in crankcase oil.
Code 0172
Component: Fuel System
Fault: Minimum adaptation limit exceeded
Condition: Too high pressure at high pressure fuel
line, TPS malfunction, shorted
connection, faulty sensor or fuel pump
module failure.
Conclusion: Oxygen Sensor Related
Sensor connector or wiring.
Sensor contaminated or damaged.
Poor ground path.
Pin circuit wiring or connectors.
ECU Black pin 10 or 17.
TPS Sensor Related
Throttle plate position incorrect during
Learn procedure.
TPS problem or malfunction.
Engine Wiring Harness Related
Difference in voltage between sensed
voltage and actual sensor voltage.
Problem in wiring harness.
ECU-to-harness connection problem.
Systems Related
Ignition (spark plug, plug wire, ignition
coil).
Fuel (fuel type/quality, injector, fuel
pressure too high, fuel pump module or
lift pump).
Combustion air (air cleaner dirty/
restricted).
Base engine problem (rings, valves).
Fuel in crankcase oil.
Fuel pump module is over lled.
Lift pump diaphragm is ruptured.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kohler Command Pro ECV880 and is the answer not in the manual?

Kohler Command Pro ECV880 Specifications

General IconGeneral
BrandKohler
ModelCommand Pro ECV880
CategoryEngine
LanguageEnglish

Related product manuals