Kohler K-4108 Homeowner's Guide

Removing the Seat
Removing the Seat for Cleaning
IMPORTANT! When removing the bidet seat for cleaning, take care
to avoid exerting any force on the hose connections. Slide the bidet
seat forward without putting pressure on the hoses, clean the area
around the mounting bracket, and reinstall the bidet seat.
Press the release button.
Carefully slide the bidet seat forward enough to allow space to
clean the area under the back of the seat.
Slide the bidet seat back into place until the mounting plate and
seat engage.
Removing the Seat for Servicing
Turn off the water supply at the supply stop.
Flush the toilet to relieve any pressure from the water supply
hose.
NOTE: The seat will contain water until drained. Refer to the
″Winterize or Drain the Tank″ section.
Unplug the bidet seat power cord.
Disconnect the water supply hose from the T-valve.
Push in the release button.
Slide the bidet seat forward to disengage the seat from the
mounting plate.
Release Button
Mounting Plate
1194356-5-B 12 Kohler Co.

Kohler K-4108 Specifications

General

Brand	Kohler
Model	K-4108
Category	Bathroom Fixtures
Language	English