Tools
Before You Begin
CAUTION: Risk of personal injury or product damage.
Handle with care. Product can break, chip or cause injury if
handled carelessly.
IMPORTANT! For lavatories without faucet holes, ensure adequate
clearance for faucet installation when determining the lavatory
placement.
Observe all local plumbing and building codes.
Inspect the drain and supply tubing. Replace if necessary.
Use the template supplied with the lavatory.
Provide your countertop manufacturer with your lavatory model
number when ordering your countertop.
If a counter-mount faucet is required, provide the faucet
information to the countertop installer to ensure the correct holes
are drilled.
Countertop manufacturer should preinstall the anchors into the
underside of the countertop. Use the anchors and fasteners
provided by the countertop manufacturer and the clamps
provided with your lavatory.
100% Silicone Sealant
1145059-2-A 2 Kohler Co.
To Next Page
Loading...
Need help?
General
