2. Install the Lavatory
TIP: To assist in positioning the lavatory, mark the 12, 3, 6, and 9
o’clock positions on the underside of the countertop.
Apply a generous bead of silicone sealant around the rim of the
lavatory.
Position the lavatory with the Kohler logo at 12 o’clock and align
the marks on the underside of the countertop with the notches in
the lavatory.
NOTE: To ensure the clips will not be seen once the lavatory is
installed, keep the edges of the clamps positioned between the edge
of the lavatory and the groove in the underside of the rim.
Secure the lavatory with the clips and screws.
Immediately wipe away any excess sealant.
Care and Cleaning
For best results, keep the following in mind when caring for your
KOHLER product:
•
Always test your cleaning solution on an inconspicuous area
before applying to the entire surface.
•
Wipe surfaces clean and rinse completely with water immediately
after applying cleaner. Rinse and dry any overspray that lands on
nearby surfaces.
Clip
Notch
Mark
Anchor Screw
Anchor
Groove
1145059-2-A 4 Kohler Co.
To Next Page
Loading...
Need help?
General
