EasyManuals Logo
Home>Komatsu>Trucks>830E-1AC

Komatsu 830E-1AC User Manual

Komatsu 830E-1AC
70 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
OM2049 2/13 Safety - Section 20
Page 20-9
Handling High Pressure Hoses
DO NOT bend high-pressure hoses or hit them
with hard objects. DO NOT use any bent or
cracked piping, tubes or hoses. They may burst
during use.
Always repair any loose or broken hoses. Fuel
and/or oil leaks may result in a fire.
Precautions With High Pressure Oil
Always remember that work equipment circuits
are always under pressure.
DO NOT add oil, drain oil, or perform
maintenance or inspections before completely
releasing the internal pressure.
Small, high pressure pin-hole leaks are extremely
dangerous. The jet stream of high-pressure oil
can pierce the skin and eyes. Always wear safety
glasses and thick gloves. Use a piece of
cardboard or a sheet of wood to check for oil
leakage.
If you are hit by a jet of high-pressure oil, consult
a doctor immediately for medical attention.
Maintenance Near High Temperatures And High
Pressures
Immediately after stopping the
truck, the engine coolant and
operating oils are at high
temperature and under high
pressure. In these conditions,
opening the system or
replacing filters may result in burns or other
injury. Wait for the temperature to cool and
pressure to subside before performing the
inspection and/or maintenance as outlined in the
service manual.
Rotating Fan And Belts
Keep a safe distance from
rotating parts such as the
radiator fan and fan belts.
Serious bodily injury may
result from direct or indirect
contact with rotating parts and flying objects.
Waste Materials
Never dump oil or other
harmful fluids into a
sewer system, rivers,
etc.
Obey appropriate laws
and regulations when
disposing of harmful
objects such as oil,
fuel, coolant, solvent, filters, batteries, and
others.
Always put fluids drained from your machine in
appropriate containers. Never drain fluids directly
onto the ground.
The machine may be equipped with optional high
intensity discharge lamps which contain mercury.
These lamps must be reused, recycled or
properly disposed of in accordance with
applicable local, state and federal laws.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Komatsu 830E-1AC and is the answer not in the manual?

Komatsu 830E-1AC Specifications

General IconGeneral
BrandKomatsu
Model830E-1AC
CategoryTrucks
LanguageEnglish

Related product manuals