Need help?Do you have a question about the Komatsu 930E-4 and is the answer not in the manual?
Manual is written for operators and technicians to understand truck systems for safe and efficient operation.
Explains the purpose of the manual, how to order copies, and provides contact information.
Lists chemicals known to cause cancer, birth defects, or reproductive harm in diesel exhaust, vehicle components, batteries, and HID lamps.
Provides dual dimensioning, metric/SAE hardware notes, and cautions on using special lubricants.
Explains how friction-reducing lubricants affect fastener clamping force and can cause breakage.
Lists engineering-approved sources for rust preventive grease for Komatsu manufacturing.
Provides torque specifications for metric Class 10.9 capscrews and Class 10 nuts, with notes on lubrication.
Specifies assembly torques for SAE Grade 5 and Grade 8 capscrews and nuts, with lubrication notes.
Provides assembly torques for SAE Hex Head and 12-point, Grade 9 capscrews, including lubrication advice.
Details tightening torque for T-Bolt type hose clamps, referencing SAE J1508 Type TB.
Lists tightening torque values for split flange clamp bolts based on thread diameter and width across flat.
Provides torque specifications for flared tube and hose fittings based on nut diameter and width across flat.
Torque chart for JIC 37° swivel nuts, with or without O-ring seals, for various size codes.
Torque chart for pipe thread fittings, with and without sealant, for various size codes.
Torque chart for O-ring boss fittings, detailing values for various size codes based on tube size and threads.
Torque chart for O-ring face seal fittings, specifying values for different size codes, tube sizes, and threads.
To Next Page
General
