PRECAUTIONS WHEN LEAVING MACHINE
If
the proper procedures are not taken when parking the machine, the machine may suddenly move off by itself,
and this may lead to serious personal injury or death. Always observe the following.
Whenever leaving the machine, be sure to lower the work
equipment to the ground, lock the work equipment by pressing
work equipment lock switch (1) (the pilot lamp lights up) and
stop the engine by setting parking brake switch (2) to ON (op-
eration) position (A). In addition, lock all places and always
take the key with you and keep it in the specified location.
ALTERNATE EXIT OF CAB
The machine with a cab has an exit for normal use on the left side, and an alternate exit on the right side. Use
the alternate exit on the right side if the exit for normal use on the left side is unavailable.
PRECAUTIONS FOR CLEANING CAB GLASS
Clean the cab glass to ensure visibility during operation.
Make sure to clean the glass with a mop from the ground.
For the cleaning procedure, see “METHOD FOR WALK-AROUND CHECK (3-204)”.
SAFETY
GENERAL PRECAUTIONS COMMON TO OPERATION AND MAINTE-
NANCE
2-21
To Next Page
Loading...
Need help?
General
