• Reverse
travel speed can be set with reverse travel speed
setting switch (A) and (B).
• Each time switch (A) is pressed, the set travel speed in-
creases.
• Each time switch (B) is pressed, the set travel speed de-
creases.
• Lower bar graph (H) indicates the reverse travel speed.
• Turn the starting switch in ON position and start the en-
gine, reverse travel speed is set approximately 20 % faster
than the forward travel speed.
• Depress switch (A) once, and the reverse travel speed be-
comes the same as the forward travel speed.
• 3rd speed is the maximum, so reverse travel speed cannot
be set faster than that.
METHOD FOR SWITCHING BETWEEN FORWARD AND REVERSE
WARNING
When switching the travel direction between FORWARD
and
REVERSE, check the safety in new direction in which
the machine moves.
CAUTION
There is no need to stop the machine even when switching
between
FORWARD and REVERSE. To increase safety, op-
erator comfort, and the life of the power train system, do
not leave the engine running at full speed while switching
the direction, and always depress the decelerator/brake
pedal to lower the engine speed.
1.
Depress decelerator/brake pedal (1) to reduce the engine
speed.
OPERATION MACHINE OPERATIONS AND CONTROLS
3-167
To Next Page
Loading...
Need help?
General
