METHOD FOR CALLING PRESET
1.
Press band/AUX selector button (1) and select FM or AM.
2.
Press one of 1 to 6 of preset button (2).
The frequency registered in the preset number of the pressed button is called up and received.
“Example”
While
a frequency is displayed, press button 1 of preset button (2), and the preset number “P-1” appears on the
display.
The preset number is shown for 0.5 seconds, and then the frequency is displayed.
METHOD FOR REGISTERING PRESET
Hold down one of 1 to 6 of preset button (1) while listening to
the radio.
The currently received frequency is registered to the preset number corresponding to the pressed button.
“Example”
While a frequency is displayed, keep pressing button 1 of preset button (1), and the preset number “P-1” is dis-
played.
After the preset number flashes 3 times, the frequency is displayed and then registered to preset number “P-1”.
METHOD FOR ADJUSTING SOUND BALANCE
1.
Press sound control button (1) to light up “BAL” on
the dis-
play.
You can adjust the sound (balance).
2.
Press tuning/time adjustment button (2) to adjust the
sound (balance).
• Press the △ button, and the speaker output on the R
side increases by 1. (R1 to R7)
• Press the ▽ button, and the speaker output on the L
side increases by 1. (L1 to L7)
HANDLE RADIO OPERATION
3-194
To Next Page
Loading...
Need help?
General
