1.
Turn the starting switch to ON position (B).
2.
Check the fuel level with fuel gauge (G).
3.
After checking, return the starting switch to OFF position
(A).
4.
Open the rear grill (1), and add fuel through the filler port
(F) to fill up the fuel tank if the fuel level is low.
Once the tank is filled up, do not try to supply additional
fuel.
For the cap opening and closing procedure, see “METH-
OD FOR OPENING AND CLOSING FUEL FILLER PORT
CAP (3-207)”.
5.
After adding, tighten the fuel filler cap securely.
Fuel tank capacity: 186 ℓ
METHOD FOR CHECKING DEF LEVEL AND ADDING DEF
WARNING
• Do not put fluid other than DEF into DEF tank.
• When opening the cap of DEF tank of the machine, the ammonia vapor may escape. Keep your face
away from the filler port.
• Foreign materials in the DEF system or urea deposits caused by precipitation of urea may hinder
operation of the devices. Before removing the filler cap, wipe off the dirt from around the filler port.
Before inserting the filler nozzle into the filler port, wipe off dirt from it.
• If DEF is spilled, immediately wipe and wash the area with water. If spilled DEF is left unattended
and the area is not washed and cleaned, it can cause corrosion to the contaminated area and emit
toxic gas.
OPERATION MACHINE OPERATIONS AND CONTROLS
3-157
To Next Page
Loading...
Need help?
General
