1. Pull out the desired tray.
2. Slide the lateral guides to fit the
size of paper to be loaded.
3. Load the paper into the tray.
From the Job List screens, multiple jobs can be managed.
The Job List screen can be displayed if [Job List] is pressed
while the Basic screen is displayed in the touch panel.
Position the original to be copied.
To change the setting for the number
of copies, press the [C] key, and then
specify the desired number of copies.
Specify the number of copies.
down on the original glass.
Load the original face up
into the reverse automatic
Print copies at full size
with the same color
and on paper of the
same size as the
original.
The finishing method and various
other settings can be specified.
For more detailed operating procedures and instructions, refer to the User
The images that are provided are print samples.
They may slightly differ in color with actual copies.
Making Copies
Loading Paper
1. Press the tray release button, and then pull out the
2. Load the paper into the right and left sides of the
Press [Basic], and then specify
the desired settings.
Press [Original Setting], and then
specify the desired settings.
Press [Original Type], and then
specify the desired settings.
Need help?
General
