E-1
INSTALLATION MANUAL
/
A0P0-9951-14
<Important>
Be sure to correctly follow the procedures in order as explained in this Installation Manual.
If you do not follow the procedure in order, the image trouble may occur.
I. Outline of installation procedures
When installing the machine and associated options as a system, follow the order shown on the upper.
Note:
• For the detailed installation procedures for each option, follow the instructions given in the corresponding
installation manual and perform the procedures correctly.
• Once the Power Switch is turned ON, do not turn OFF it until the installation work has been completed.
• When transporting the machine, assign an adequate number of persons to the job and follow the speci-
fied correct procedures.
(mass: approx. 221 kg (487-1/4 lb))
OT-503
Machine
Electronic system options
MK-715
*1
SP-501
IC-412
*2
VI-505
*2
✱ Electronic system options
MK-720
*2
EK-604
*2
UK-203
*2
WT-506
AU-102
LU-204
*1
: Varies depending on the applicable marketing area.
*2
: No particular order in installation procedures.
AU-101
ZU-606
AU-201
LU-301
PK-516
SD-508
FK-502
KH-101
FS-526
JS-602
PI-505
EK-605
*1*2
SC-507
*2
A0P0IXC089DA
II. Installation space (unit: mm (inch))
bizhub C652 + ZU-606 + FS-526 + LU-204
III. Pre-installation check items
1. Select a level and stable place for installing the
machine.
2. Be sure to use a power source of the voltage and
frequency indicated in the product specifications.
Ensure that the current carrying capacity of the
power outlet is at least equal to the current listed
in the product specifications.
3. Power the machine directly from a dedicated
power outlet. (Do not use an extension cord.)
4. Do not plug or unplug the power cord with wet or
dirty hands, otherwise you may get an electric
shock.
5. Avoid a hot and humid environment, or a place
exposed to direct sunlight.
6. Avoid a dusty location, or a place near volatile
and flammable substances.
7. Avoid a poorly ventilated place.
IV. Accessory parts
* Varies depending on the applicable marketing
area.
Note:
Keep the label (Super G3 label) at hand. It is nec-
essary for mounting the FAX Kit.
A0P0IXC090DA
418
(16-7/16)
1107
(43-9/16)
1155
(45-1/2)
495
(19-1/2)
1252
(49-5/16)
1575 (62-1/16)
1650 (64-15/16)
238
(9-3/8)
50
(2)
1064
(41-7/8)
2554 (100-9/16)
No. Name Q’ty
1. User’s guide holder 1
2. Quick guide
(Copy/Fax/Scan/Box operations)
1
3. Installation manual 1 set
4. User’s guide CD 1
5. CD-ROM 1 set
6. Tray label 1
7. Paper size label 1
8. Label (Legal restrictions on copying) * 1
9. Label (Super G3 label) 1
10. Chart 1
11. Cap A (black) 2
12. Cap B (white) 2
13. Power cord * 1
14. Connector cover 1
15. IR Cover 1
16. Mounting screw 1
17. Spacer A 1
18. Spacer B 1
19. Power cord instruction * 1
20. Panel pen 1
After unpacking, be sure to get rid of the
packaging materials and keep them out of
the reach of children.
Putting the head in the plastic bag
involves danger of suffocation.
Applied Machines: /
To Next Page
Need help?
General
Weight and Dimensions
