Overview
3
3 Overview
The VM-1610 is a high-performance distribution amplifier for balanced
stereo signals. It can also be configured as one 1:10 or two 1:5 balanced
stereo audio distribution amplifiers.
The VM-1610 features:
• Grouped audio level controls
• Configuration as a 1:10 or 2x1:5 DA
• A signal to noise ratio of 92dB @1Vpp
• A standard 1U 19” rack mount size
The VM-80A is a high-performance distribution amplifier for balanced
stereo audio signals. It can be configured as one 1:8 or two 1:4 balanced
stereo audio distribution amplifiers.
The VM-80A features:
• Grouped audio level controls
• Configuration as a 1:8 or 2x1:4 DA
• A signal to noise ratio of 100dB @1Vpp
• Compact desktop size. Two units can be rack mounted side-by-
side in a 1U rack space with the optional RK-1 adapter
To achieve the best performance:
• Use only good quality connection cables
1
• Avoid interference from neighboring electrical appliances that
may adversely influence signal quality and position your Kramer
products away from moisture, excessive sunlight and dust
to avoid interference,
deterioration in signal quality due to poor matching, and elevated
noise levels (often associated with low quality cables).
4 Your VM-1610 and VM-80A Distribution Amplifiers
Section 4.1 defines the VM-1610 and section 4.2 defines the VM-80A
distribution amplifiers.
4.1 Your VM-1610 1:10 Balanced Audio-Stereo Distributor
Figure 1 and Table 1 define the VM-1610.
1 Available from Kramer Electronics on our Web site at http://www.kramerelectronics.com
To Next Page
Need help?
General
