29
Owner’s manual
EN
Allow the device to cool completely before cleaning! Wait at least 1 hour before cleaning!
Wipe the device casing with a soft, slightly damp cloth. Do not use detergent or abrasives as
this may damage the surface. The device, the power cable and the mains plug must not be
immersed in water or any other liquid!
For cleaning of the lens use only specialized cloths or mild detergents. DO NOT apply any
detergents directly to lens!
DO NOT use compressed air to clean the device. Cleaning inside of the device with
compressed air will damage the device!
outlet cover (at the back of the housing) can be removed for cleaning of the accumulated
dust with soft cloth.
Allow the device to fully dry before using again.
It is suggested to close the lens cover when the device is not in use.
Store the device in dry place in room temperature.
Native resolution: 1280x720 px
Max. resolution: 1920x1080 px
Projection size: 50-120”
Contrast ratio: 1500:1
Aspect ratio: 16:9 / 4:3
Focus: manual
Lamp type: LED 70 W
Keystone adjustment: manual (±15°)
Noise level: <45 dB
Projection distance: 1,5-3,5 m
Wireless connectivity: Wi-Fi
Built-in speaker: 3 W; 4 Ohm
Sound control: balance
Video: MPEG1, MPEG2, H.263, H.264, AVS, VC1, MJPEG, RV30, RV40, HEVC
Pictures: JEPG, PNG, BMP
Audio: MPEG1, MPEG2, LPCM, MP3
USB media: movie, music, photo, text
Mounting threads: 1x M4, 1x 1/4”
INPUTS / OUTPUTS:
» Headphone output (3, 5 Jack)
» 2x HDMI
» 2x USB (2.0)
» AV input
» VGA
Power supply: 100-240 V; 50/60 Hz
Power consumption: 70 W
Operating temperature: 0~30°C
Please note: illustrations and descriptions concerning system are for reference only, and may vary from
actual software on your device! Any information included in this manual are subject to change without prior
notice. Interfering with device software will void the warranty.
To Next Page
Loading...
Need help?
General
