English
1- Lift the removable water tank (a) from the machine and fill it with the desired
amount of cold water. Use filtered water if possible. (Fig 1a/ Fig 1b)
2- Put the water tank (a) back in place in the machine. Take care to insert it securely.
3- Insert the carafe or thermal jug (h) on its plate/base (g). Be sure that the
carafe or thermal jug (h) sits flat and level on the heating plate (g) before starting
the brew cycle.
Note : If you use the carafe (h) to fill the tank with cold water rinse the carafe (h)
with hot water before starting the brew cycle. This will help raise the temperature
of the coffee in the carafe (h).
4- Open the drawer (e) and add paper or permanent filter to the brew basket.
Krups original accessories:
-#4 paper filters 100-pack. Item # 983
-#4 size gold tone filter. Item # 049
5- Add ground coffee to the basket.
- Measure maximum one rounded coffee scoop per 5 oz. cup
of water.
- This simple step is critical to the taste of your brewed coffee.
- See your brewing guide on page 13 for more detail.
8
cafetie?re lafayette KM 810.qxd:KM 8005 franc%ais - copie.qxd 29/04/09 15:07 Page 8
To Next Page
Loading...
Need help?
General
