Preparing the appliance
Remove and ll the water tank (7).
Press rmly to replace it and close the lid.
Remove the lid of the coffee container and add coffee beans. Replace the lid (8).
Do not ll the tanks with hot water, milk or any other liquid. If the water tank is missing or not completely full (beneath
the “min” level) while the appliance is switched on, the message “Fill tank” will appear and it will be temporarily impossible
to make any coffee or espresso.
Claris - Aqua Filter System F 088 cartridge (sold separately)
For the best avours and to make sure your appliance lasts as long as possible, we recommend you only use the Claris - Aqua
Filter System cartridge, sold separately.
(3): Mechanism to memorise the month the cartridge was tted and when it should be changed (after 2 months maximum).
Your appliance will let you know when you should replace your Claris - Aqua Filter System cartridge by displaying a message.
Filter installation (Claris - Aqua Filter System cartridge)
Note: To correctly prime your cartridge, ensure that you follow the installation procedure each time you change the cartridge.
First time use: Choose the “YES” option in the “Filter” function, then follow the on-screen prompts.
Installing the cartridge in the machine: screw the lter into the base of the water tank, using the handle provided (4).
Insert the steam nozzle (5).
Place a 0.6 L container beneath the steam nozzle (6).
Later installation or when replacing a lter: Select the “Filter” menu by pressing PROG: “Maintenance” - OK - “Filter”- OK
- “Insert” (or change) - OK - and follow the on-screen prompts.
Automatic rinsing
When rst using your machine, you may choose to activate automatic rinsing. To do this, choose the “YES” option on the
“Auto rinse” menu. Rinsing will take place each time you turn on the machine.
To modify this at a later stage, you can select automatic rinsing by pressing PROG – Settings - Auto rinse.
DURING RINSING OPERATIONS, HOT WATER COMES FROM THE NOZZLES. BE CAREFUL NOT TO SCALD YOURSELF.
NEVER PUT GROUND COFFEE IN THE COFFEE CONTAINER
Use of coffee beans that are oily, caramelised or avoured is not recommended for this machine. This type of bean may damage
the machine.
Make sure that no foreign bodies such as small stones among the coffee beans enter the coffee container. Any damage due to
foreign bodies having entered the coffee container is not covered by the guarantee. Do not put water in the coffee bean container.
To avoid staining your worktop or scalding yourself with used water, ensure you attach the drip collector tray.
Check the water tank is clean.
First use/setting the machine
The rotating button enables you to select a function or increase/reduce values. Pressing this button conrms your choice.
Switch the appliance on by pressing the “On/Off” button (9). Follow the on-screen prompts in the “Language choice” menu.
Select a language using the rotating button. The selected language will be highlighted (10-11).
Conrm by pressing the conrmation button (12).
On the rst use, the appliance will ask you to set a number of parameters. If you unplug your appliance, you will have to reset
some of these parameters.
The appliance will ask you to set:
Language
Volume unit
Date
Clock
Auto-off
Auto-on
Water hardness
Automatic rinsing
Filter
You can select the language of your choice from those presented.
You can set the unit of measurement to ml or oz.
It is up to you to set the date.
You can select the display of a 12 or 24-hour clock.
You can select the length of time after which your appliance will switch off automatically.
You can automatically start pre-heating of your appliance at a selected time.
You must set the hardness of your water between 0 and 4. See the section “Measuring the
water hardness”.
You can set rinsing to take place each time the machine is switched on.
You must indicate whether or not a lter is present (Claris - Aqua Filter System cartridge).
On the rst use, the appliance may ask to be relled. Simply follow the on-screen prompts.
22
To Next Page
Loading...
Need help?
General
