17
NOTE:
Choose function within 2 minutes or else the machine will go back to
Ready mode. ORANGE light will blink 3 times every 2 seconds, indicating the “Factory
reset” function.
NOTE:
the machine will blink 3 times every
2 seconds until the buon will be pressed.
NOTE:
It is possible at any time to exit the Special Functions menu by
pushing the buon and pressing the lever down at the same time for 3 seconds.
GREEN steady light indicates the machine is ready.
NOTE:
Choose special function by pressing the lever down: 1 time for "Descaling". 2 times for "Emptying the system". 3 times for "Reset to factory seings"
RESET TO FACTORY SETTINGS
3
Choose function by pressing the lever down:
- 3 times for "Reset to factory seings"
1
Turn the machine "OFF" by pushing the lever down
for 3 seconds.
2
To enter "Factory seings" mode, push the buon
and the lever down at the same time for 3 seconds.
ORANGE steady light indicates entry into the Special
Functions menu.
4
Push the buon to confirm.
ORANGE light will blink 3 times in 3 seconds to
confirm reset is done and then go to steady GREEN.
The machine is now ready to use.
11065_UM_ARES_C_Krups.indd 17 16.05.17 14:03