ENGLISH
18
Adjusting the idle speed (Dell’Orto SHA 1412) *
The idle speed can be adjusted with throttle stop screw 1.
Turning in clockwise direction will increase the idle speed.
Turning in counterclockwise direction will reduce the idle speed.
Adjusting the idle speed (Mikuni VM18-144) *
The idle speed can be adjusted with throttle stop screw 2.
Turning in clockwise direction will increase the idle speed.
Turning in counterclockwise direction will reduce the idle speed.
Function of air control screw
3: turning it clockwise makes the idle mixtu-
re richer, while turning it counter-clockwise makes it leaner.
The basic setting is described in the chapter "Technical Specifications".
!
CAUTION
!
Never set the idle speed by means of the air control screw!
Adjusting the idle speed (Mikuni VM14-117) *
The idle speed can be adjusted with throttle stop screw 4.
Turning in clockwise direction will increase the idle speed.
Turning in counterclockwise direction will reduce the idle speed.
Function of mixture control screw
5: turning it clockwise makes the idle
mixture leaner, while turning it counter-clockwise makes it richer.
!
CAUTION
!
Never set the idle speed by means of the mixture control screw!
Checking the gear oil level
To check the gear oil level, first remove the plug 6. With the motorcycle
parked in an upright position, a small quantity of oil should flow out of the
indicator opening
7. If oil must be added, tilt the motorcycle and pour gear
oil ( Shell Advance EP 80) into the bore.
!
CAUTION
!
T
OO LITTLE OIL OR A POOR OIL QUALITY LEAD TO PREMATURE TRANSMISSION WEAR.
T
HEREFORE, ONLY USE BRANDED PRODUCTS (SHELL ADVANCE EP 80).
1
4
5
7
6
2
3
To Next Page
Loading...
Need help?
General
