EasyManuals Logo

KTM 250 EXC-F 2018 User Manual

KTM 250 EXC-F 2018
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #33 background imageLoading...
Page #33 background image
3 WORK
31
Warning
Environmental hazardHazardous substances cause environmental damage.
Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance with
the applicable regulations.
Info
Even when there is no load on the battery, it discharges steadily.
The charging level and the method of charging are very important for the service life of the battery.
Rapid recharging with a high charging current shortens the service life of the battery.
If the charging current, charging voltage, or charging time are exceeded, the battery will be destroyed.
If the battery is depleted by repeated starting, the battery must be charged immediately.
If the battery is left in a discharged state for an extended period, over-discharge and sulfating occurs,
destroying the battery.
The battery is maintenance-free, i.e., the acid level does not have to be checked.
Preparatory work
Remove the seat. ( p. 26)
311910-10
Main work
Connect the battery charger to the battery. Set the battery
charger.
Alternative 1
Battery charger XCharge-professional EU
(00029095050)
Alternative 2
Battery charger XCharge-professional US
(00029095051)
Alternative 3
Battery charger XCharge-professional GB
(00029095052)
Alternative 4
Battery charger XCharge-professional CH
(00029095053)
Info
Follow the instructions of the charger and the manual.
Disconnect the battery charger after charging the battery.
Guideline
The charging current, charging voltage, and charging time
must not be exceeded.
Charge the battery regularly
when the motorcycle is not
in use
3 months
Finishing work
Mount the seat. ( p. 26)

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KTM 250 EXC-F 2018 and is the answer not in the manual?

KTM 250 EXC-F 2018 Specifications

General IconGeneral
Displacement249.91 cm³
Bore x Stroke78 mm x 52.3 mm
StarterElectric starter
Transmission6-speed
CoolingLiquid cooled
Rear SuspensionWP Xplor PDS shock absorber
Ground Clearance370 mm
Seat Height960 mm
Compression Ratio12.8:1
IgnitionKokusan
ABSNo
Engine TypeSingle cylinder, 4-stroke
Front SuspensionWP Xplor 48
Front BrakeDisc brake
Rear BrakeDisc brake
ClutchWet multi-disc clutch, hydraulically operated
Wheelbase1482 mm
Front Wheel21"
Rear Wheel18"
Fuel SystemKeihin EFI, throttle body 42 mm
FrameCentral double-cradle-type 25CrMo4 steel
Front Tire90/90-21

Related product manuals