KTM 250 EXC-F 2018 User Manual

2 SETUP
3
2.1 Unpacking and setting up the vehicle
E00851-10
Condition
Packaging V2
– Remove the box and the plastic packaging.
Info
An assistant prevents the motorcycle from falling
over.
To avoid damaging the motorcycle during the setup,
leave the protective film on the vehicle until you
have finished.
– Remove the separate enclosure and unpack it. Check that
the scope of supply is complete using the enclosed pack-
ing list.
– Have a lift stand available.
Lift stand (78129955100)
– Carefully loosen and remove the tension belt of the footrest
mount.
Info
An assistant prevents the motorcycle from falling
over.
402050-01
– Together with an assistant, take the vehicle off the pallet.
– Position the vehicle on a lift stand.
– Check the vehicle for transport damage.
– Remove the headlight mask with the headlight. ( p. 19)
H01768-10
–
Position the turn signal indicator lamp
1
in the
speedometer bracket.

KTM 250 EXC-F 2018 Specifications

General

Brand	KTM
Model	250 EXC-F 2018
Category	Motorcycle
Language	English