KTM 250 EXC-F 2018 User Manual

3 WORK
33
E00507-10
(EXC-F US)
– Thoroughly clean the plug-in connection of the fuel line
using compressed air.
Info
Under no circumstances should dirt enter into the
fuel line. Dirt in the fuel line clogs the injection
valve!
– Disconnect the plug-in connection of the fuel line.
Info
Remaining fuel may flow out of the fuel line.
–
Mount wash cap set
2
.
Wash cap set (81212016100)
K00558-10
–
Remove screws
3
with the collar bushings.
– Hang the horn and horn bracket to one side.
K00556-11
–
Remove screw
4
with the rubber bushing.
K00559-10
– Pull both spoilers off the sides of the radiator bracket and lift
off the fuel tank.

KTM 250 EXC-F 2018 Specifications

General

Displacement	249.91 cm³
Bore x Stroke	78 mm x 52.3 mm
Starter	Electric starter
Transmission	6-speed
Cooling	Liquid cooled
Rear Suspension	WP Xplor PDS shock absorber
Ground Clearance	370 mm
Seat Height	960 mm
Compression Ratio	12.8:1
Ignition	Kokusan
ABS	No
Engine Type	Single cylinder, 4-stroke
Front Suspension	WP Xplor 48
Front Brake	Disc brake
Rear Brake	Disc brake
Clutch	Wet multi-disc clutch, hydraulically operated
Wheelbase	1482 mm
Front Wheel	21"
Rear Wheel	18"
Fuel System	Keihin EFI, throttle body 42 mm
Frame	Central double-cradle-type 25CrMo4 steel
Front Tire	90/90-21