KTM 250 EXC-F 2018 User Manual

3 WORK
36
S01405-01
Main work
(EXC‑F EU/AU/BR, EXC‑F Six Days)
– Check throttle cable routing.
Both throttle cables must be routed, side by side,
on the back of the handlebars and above the fuel
tank bracket, to the throttle valve body. Both throttle
cables must be secured behind the fuel tank contact
area rubber band.
» If the throttle cable routing is not as specified:
– Correct throttle cable routing.
S01404-01
(EXC-F US)
– Check throttle cable routing.
Both throttle cables must be routed, side by side,
on the back of the handlebars and above the fuel
tank bracket, to the throttle valve body. Both throttle
cables must be secured behind the fuel tank contact
area rubber band.
» If the throttle cable routing is not as specified:
– Correct throttle cable routing.
Finishing work
– Install the fuel tank. ( p. 34)
– Mount the seat. ( p. 26)

KTM 250 EXC-F 2018 Specifications

General

Displacement	249.91 cm³
Bore x Stroke	78 mm x 52.3 mm
Starter	Electric starter
Transmission	6-speed
Cooling	Liquid cooled
Rear Suspension	WP Xplor PDS shock absorber
Ground Clearance	370 mm
Seat Height	960 mm
Compression Ratio	12.8:1
Ignition	Kokusan
ABS	No
Engine Type	Single cylinder, 4-stroke
Front Suspension	WP Xplor 48
Front Brake	Disc brake
Rear Brake	Disc brake
Clutch	Wet multi-disc clutch, hydraulically operated
Wheelbase	1482 mm
Front Wheel	21"
Rear Wheel	18"
Fuel System	Keihin EFI, throttle body 42 mm
Frame	Central double-cradle-type 25CrMo4 steel
Front Tire	90/90-21