KTM 250 EXC-F 2018 User Manual

4 TECHNICAL DATA
43
Screw, front brake caliper M8 25 Nm (18.4 lbf ft)
Loctite
®
243™
Screw, handlebar clamp M8 20 Nm (14.8 lbf ft)
Screw, manifold on cylinder head
brace
M8 15 Nm (11.1 lbf ft)
Screw, side stand attachment M8 35 Nm (25.8 lbf ft)
Loctite
®
2701™
Screw, subframe M8 35 Nm (25.8 lbf ft)
Loctite
®
2701™
Screw, top steering stem
(EXC‑F Six Days)
M8 17 Nm (12.5 lbf ft)
Loctite
®
243™
Screw, top steering stem
(EXC‑F EU/AU/BR/US)
M8 20 Nm (14.8 lbf ft)
Screw, top triple clamp
(EXC‑F Six Days)
M8 17 Nm (12.5 lbf ft)
Screw, top triple clamp
(EXC‑F EU/AU/BR/US)
M8 20 Nm (14.8 lbf ft)
Engine attachment bolt M10 60 Nm (44.3 lbf ft)
Remaining nuts, chassis M10 45 Nm (33.2 lbf ft)
Remaining screws, chassis M10 45 Nm (33.2 lbf ft)
Screw, handlebar holder M10 40 Nm (29.5 lbf ft)
Loctite
®
243™
Nut, fuel pump fixation M12 15 Nm (11.1 lbf ft)
Screw, bottom shock absorber M12 80 Nm (59 lbf ft)
Loctite
®
2701™
Screw, top shock absorber M12 80 Nm (59 lbf ft)
Loctite
®
2701™
Nut, swingarm pivot M16x1.5 100 Nm (73.8 lbf ft)
SAS valve M16x1.5 15 Nm (11.1 lbf ft)
Nut, rear wheel spindle M20x1.5 80 Nm (59 lbf ft)
Screw, front wheel spindle M20x1.5 35 Nm (25.8 lbf ft)
Screw, top steering head M20x1.5 12 Nm (8.9 lbf ft)
Screw-in nozzles, cooling system M20x1.5 12 Nm (8.9 lbf ft)
Loctite
®
243™

KTM 250 EXC-F 2018 Specifications

General

Displacement	249.91 cm³
Bore x Stroke	78 mm x 52.3 mm
Starter	Electric starter
Transmission	6-speed
Cooling	Liquid cooled
Rear Suspension	WP Xplor PDS shock absorber
Ground Clearance	370 mm
Seat Height	960 mm
Compression Ratio	12.8:1
Ignition	Kokusan
ABS	No
Engine Type	Single cylinder, 4-stroke
Front Suspension	WP Xplor 48
Front Brake	Disc brake
Rear Brake	Disc brake
Clutch	Wet multi-disc clutch, hydraulically operated
Wheelbase	1482 mm
Front Wheel	21"
Rear Wheel	18"
Fuel System	Keihin EFI, throttle body 42 mm
Frame	Central double-cradle-type 25CrMo4 steel
Front Tire	90/90-21