EasyManuals Logo

KTM 250 EXC TPI 2019 Setup Instructions

KTM 250 EXC TPI 2019
45 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
3 WORK
22
3.6 Installing the fuel tank
Danger
Fire hazardFuel is highly flammable.
The fuel in the fuel tank expands when warm and can escape if overfilled.
Do not refuel the vehicle in the vicinity of open flames or lit cigarettes.
Switch off the engine for refueling.
Make sure that no fuel is spilled; particularly not on hot parts of the vehicle.
If any fuel is spilled, wipe it off immediately.
Observe the specifications for refueling.
Warning
Danger of poisoningFuel is poisonous and a health hazard.
Avoid skin, eye and clothing contact with fuel.
Immediately consult a doctor if you swallow fuel.
Do not inhale fuel vapors.
In case of skin contact, rinse the affected area with plenty of water.
Rinse the eyes thoroughly with water, and consult a doctor in case of fuel contact with the eyes.
Change your clothing in case of fuel spills on them.
Main work
Check throttle cable routing. ( p. 23)
E00883-11
Position the fuel tank and fit the two spoilers to the sides in
front of the radiator bracket.
Make sure that no cables or throttle cables are trapped or dam-
aged.
E00882-11
Mount and tighten screw
1
with the rubber bushing.
Guideline
Remaining screws,
chassis
M6 10 Nm (7.4 lbf ft)
(All EXC models)
Position the horn with the horn bracket.

Other manuals for KTM 250 EXC TPI 2019

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KTM 250 EXC TPI 2019 and is the answer not in the manual?

KTM 250 EXC TPI 2019 Specifications

General IconGeneral
BrandKTM
Model250 EXC TPI 2019
CategoryMotorcycle
LanguageEnglish

Related product manuals