RIDING INSTRUCTIONS 8
29
Note
Material damage The vehicle may be damaged by incorrect procedure when parking.
Significant damage may be caused if the vehicle rolls away or falls over.
The components for parking the vehicle are designed only for the weight of the vehicle.
– Park the vehicle on a firm and level surface.
– Ensure that nobody sits on the vehicle when the vehicle is parked on a stand.
– Apply the brakes on the motorcycle.
– Shift the transmission to neutral position.
– Press and hold the kill switch while the engine is idling until the engine stops.
– Turn tap handle of the fuel tap to the OFF position.
– Rest the vehicle on the plug-in stand.
8.7 Transporting
Note
Danger of damage The parked vehicle can roll away or fall over.
– Park the vehicle on a firm and level surface.
Note
Fire hazard Hot vehicle components pose a fire hazard and explosion risk.
– Do not park the vehicle near to materials which are highly flammable or explosive.
– Allow the vehicle to cool down before covering it.
H02628-01
– Switch off the engine.
– Mount plug-in stand on the fork legs.
Plug-in stand (79029094000)
Info
The plug-in stand is included.
Make sure the brake line runs in front of the plug-in
stand and does not become wedged.
401475-01
– Use tension belts or other suitable devices to secure the
motorcycle against falling over or rolling away.
Info
Only tighten the tension belts to the point that the
plug-in stand is in contact with the fender and tires.
Pay attention to the alignment of the plug-in stand to
the fender.
To Next Page
Loading...
Need help?
General
