To Next Page

To Previous Page

3 WORK

3.3 Installing the front wheel

Warning

Danger of accidents Oil or grease on the brake discs reduces the braking effect.

– Always keep the brake discs free of oil and grease.

– Clean the brake discs with brake cleaner when necessary.

H00935-10

– Check the wheel bearing for damage and wear.

» If the wheel bearing is damaged or worn:

– Change front wheel bearing.

–

Clean and grease shaft seal rings

and contact surfaces

of the spacers.

Long-life grease ( p. 25)

– Insert the spacers.

– Clean and grease the wheel spindle.

Long-life grease ( p. 25)

– Position the front wheel and insert the wheel spindle.

The brake linings are correctly positioned.

F00141-11

–

Mount and tighten screw

Guideline

Screw, front wheel

spindle

M20x1.5 35 Nm (25.8 lbf ft)

– Operate the hand brake lever several times until the brake lin-

ings are seated correctly against the brake disc.

– Remove the motorcycle from the lift stand. ( p. 13)

– Operate the front brake and compress the fork a few times

firmly.

The fork legs straighten.

–

Tighten screws

Guideline

Screw, fork stub M8 15 Nm (11.1 lbf ft)

Other manuals for KTM 450 SX-F 2019

Questions and Answers:

Need help?

Do you have a question about the KTM 450 SX-F 2019 and is the answer not in the manual?

General