KTM 450 SX-F User Manual

11 SERVICE WORK ON THE CHASSIS 40
101956-10
–
Remove screws
3
on the right fork leg. Take off the fork protector.
11.12 Installing the fork protector x (SX‑F Factory Edition)
101956-11
–
Position the fork protector on the right fork leg. Mount and tighten screws
1
.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
101955-11
–
Position the fork protector on the left fork leg. Mount and tighten screws
2
.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
–
Position the brake line, wiring harness, and clamp. Mount and tighten screws
3
.
11.13 Removing the lower triple clamp x
Preparatory work
– Raise the motorcycle with the lift stand. ( p. 36)
–
Remove the front wheel. x ( p. 69)
–
Remove the fork legs. x ( p. 38)
– Remove the start number plate. ( p. 44)
– Remove the front fender. ( p. 44)
– Remove the handlebar cushion.
S00144-10
Main work
–
Remove screw
1
.
–
Remove screw
2
.
– Take off the top triple clamp with the handlebar and set it aside.
Info
Protect the motorcycle and its attachments against damage by covering
them.
Do not bend the cables and lines.
S00145-10
–
Remove O-ring
3
. Remove protective ring
4
.
– Take out the lower triple clamp with the steering stem.
– Take out the upper steering head bearing.

KTM 450 SX-F Specifications

General

Brand	KTM
Model	450 SX-F
Category	Motorcycle
Language	English