MAINTENANCE ON CHASSIS AND ENGINE 157
600121-10
– Open the screw to bleed the cylinder head. Tighten the screw when coolant
emerges from the opening.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
Info
Ensure that the radiator is always filled with a sufficient amount of coolant.
600122-10
– Open the screw to bleed the radiator. Tighten the screw when coolant emerges
from the opening.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
600123-10
– Completely fill the radiator and close the radiator cap .
– Place the vehicle on the ground.
To Next Page
Loading...
Need help?
General
