CLEANING 178
– After rinsing the vehicle with a gentle water spray, allow it to dry thoroughly.
– Clean and dry the air filter box.
–
Empty the carburetor float chamber. x ( p. 161)
Warning
Danger of accidents Reduced braking due to wet or dirty brakes.
– Clean or dry dirty or wet brakes by riding and braking gently.
– After cleaning, ride the vehicle a short distance until the engine warms up, and then apply the brakes.
Info
The heat produced causes water at inaccessible positions in the engine and the brakes to evaporate.
– Push back the protection covers on the handlebar instruments to allow water to evaporate.
– After the vehicle has cooled off, oil or grease all moving parts and bearings.
– Clean the chain. ( p. 97)
– Treat bare metal parts (except for brake discs and exhaust system) with anti-corrosion materials.
Cleaning and polishing materials for metal, rubber and plastic ( p. 197)
– Treat all painted parts with a mild paint polish.
High-luster polish for paint ( p. 198)
– To prevent electrical problems, treat electric contacts and switches with contact spray.
Contact spray ( p. 197)
To Next Page
Loading...
