MAINTENANCE ON CHASSIS AND ENGINE 74
Warning
Danger of accidents Do not make any radical changes to the adjustment of the shock absorbers.
– Only make adjustments within the recommended range.
Info
The compression damping setting has an impact on the compression of the shock absorber.
100080-10
– Turn the adjusting wheel clockwise until it stops.
– Turn back counterclockwise by the number of clicks corresponding to the shock
absorber type.
Guideline
Compression damping
Standard 17 clicks
Maximum deviation from standard
value
−5… 5 clicks
Tip
Experience has shown that settings outside of this range are detrimental to vehi-
cle handling. When changing the chassis settings, always start with the standard
setting.
Info
Turn clockwise to increase damping, turn counterclockwise to reduce suspension
damping.
To Next Page
Loading...
Need help?
General
