EasyManuals Logo
Home>Kubota>Portable Generator>GL6000-STD

Kubota GL6000-STD User Manual

Kubota GL6000-STD
62 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
ENGLISH
To prevent electrical shock the following instruction must be followed.
Before the generator can be connected to a building’s electrical
system, a licensed electrician must install an isolation (transfer) switch
in the building’s main fuse box. The switch is the connection point for
generator power and allows selection of generator or main line power
to the building.
This will prevent the generator from charging the main power line
(backfeeding) when the main power supply has failed or has been
turned off for line repair. Backfeeding can electrocute or injure line
maintenance personnel. Also, generator and building electrical system
damage can occur when normal operating power returns if unit is used
without an isolation switch.
3
WARNING
WARNING
IMPORTANT
The engine in this machine is not equipped by the manufacture with
a standard spark arrester.
It is a violation of California Public Resource Code Section 4442 to
use or operate this engine on or near any forest-covered, brush-
covered land, or grass- covered land unless the exhaust system is
equipped with a working spark arrester meeting state laws. Other
states or federal areas may have similar laws.
California Proposition 65
Engine exhaust, some of its constituents,
certain vehicle components and fluids,
contain or emit chemicals known to the
State of California to cause cancer and birth
defects or other reproductive harm.
WARNING

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kubota GL6000-STD and is the answer not in the manual?

Kubota GL6000-STD Specifications

General IconGeneral
BrandKubota
ModelGL6000-STD
CategoryPortable Generator
LanguageEnglish

Related product manuals