Kubota GL6000-STD User Manual

23SERVICE INTERVALS
ENGLISH
SERVICE INTERVALS
Observe the following for service and maintenance.
The lubricating oil change intervals listed in the table below are for Classes CF, CE and CD lubricating oils of API
classification with a low-sulfur fuel in use. If the CF-4 or CG-4 lubricating oil is used with a high-sulfur fuel, change the
lubricating oil at shorter intervals than recommended in the table below depending on the operating condition.
A The jobs indicated by must be done after the first 50 hours of operation.
*1 Air cleaner should be cleaned more often in dusty conditions than in normal conditions.
*2 After 6 times of cleaning.
*3 Consult your local KUBOTA Dealer for this service.
*4 Replace earlier if necessary.
A The items listed above (@ marked) are registered as emission related critical parts by KUBOTA in the U.S. EPA
non-road emission regulation. As the engine owner, you are responsible for the performance of the required
maintenance on the engine according to the above instruction.
Please see the Warranty Statement in detail.
A When the battery is used for less than 100 hours in a year, check its electrolyte yearly. (for refillable battery’s only)
No. Check point
Interval
Ref.
page
First
50
hours
Every
50
hours
Every
100
hours
Every
200
hours
Every
400
hours
Every
500
hours
Every
800
hours
Every
1500
hours
Every
3000
hours
Every
1
year
Every
2
years
1 Check of fuel pipes and clamp bands 26 @
2 Change of engine oil 28
3 Cleaning of air cleaner element 29 *1 @
4 Check of battery electrolyte level 33
5 Check of fan belt tension 36
6
Check of radiator hoses and clamp bands 32
7 Check of intake air hose —@
8 Replacement of oil filter cartridge 28
9
Replacement of fuel filter cartridge or element —@
10 Cleaning of fuel filter 27
11
Cleaning of water jacket (radiator interior) 32
12 Replacement of fan belt 36
13 Check of valve clearance —
14
Replacement of air cleaner element 29 *2 @
15
Check of damage in electric wiring
and loose connections
35
16
Check of fuel injection nozzle
injection pressure
—*3@
17 Check of injection pump —*3@
18
Replacement of fuel pipes, fuel
gauge and clamp bands
26 *3 @
19
Replacement of radiator hoses
and clamp bands
32
20 Replacement of battery 33
21 Change of radiator coolant (L.L.C.) 31
22 Replacement of intake air hose —*4@

Kubota GL6000-STD Specifications

General

Brand	Kubota
Model	GL6000-STD
Category	Portable Generator
Language	English